If you own a pool, you have already considered buying a pool cleaner to help you finish cleaning the pool fast and with as little effort as possible. In the following lines, we will explain everything about the different types of pool cleaners available on the market to make it easier for you to decide what type of pool cleaner to use. Therefore, continue to read if you are interested and if you want to make an informed choice.
Suction pool cleaners
Suction pool cleaners are the least expensive type of pool cleaners. The suction pool cleaner follows a random course instead of following a certain cleaning pattern. It’s powered solely by the main pump of the pool, and it uses the pool’s main filter in order to remove debris and dirt from the water. This type of pool cleaner effectively diminishes the suction of the main pump. Unfortunately, if you use such a device you will increase the electricity costs and you will have to service the main pump and filter system more frequently. On the bright side, suction pool cleaners require minimal maintenance, and the replacement parts for these units are cheap.
Pressure side pool cleaners
Pressure side pool cleaners pressurize the pool water inflow using a secondary pump. The high-pressure water is used for locomotion and debris suction. Just like the suction pool cleaner, the pressure side pool cleaner follows a random course when cleaning the pool. Due to the fact that this type of pool cleaner requires a booster pump to operate, it’s the highest type of pool cleaner when it comes to electricity use. It’s dependent on the pool’s main pump and filter system to remove contaminants from the pool water. The cost for a pressure side pool cleaner can range from $200 to about $700. To this sum of money, you have to add the cost of the booster pump, which is usually around $200.
Robotic pool cleaners
Robotic pool cleaners are independent of the pool’s main filter and pump system. They are powered by a separate electricity source from the water in the pool. Robotic pool cleaners feature 2 internal motors. One of the motors sucks in water through a self-contained filter bag, and then it returns the filtered water at a high rate of speed back into the pool water. The second motor is connected to tractor-like rubber or synthetic tracks and brushes that are connected by plastic or rubber bands through a metal shaft. The brushes are located on the front and back of the machine. They help remove contaminants from the pool’s walls, floor, and steps. Also, they direct the contaminants into the internal filter bag. Robotic pool cleaners are the most expensive type of pool cleaners, but they are worth every penny that you spend on them because they are able to clean the pool’s water and surfaces on their own. The most important benefits provided by these types of pool cleaners are efficiency in time, energy, and cleaning ability.